SELT

VENETIAN BLINDS
C80L FLAT
<

C80 L FLAT system is a variant of C80 Venetian blinds, which instead of traditional extruded aluminium side guides, has been equipped with cable guides made of galvanized steel. The cable guides have an additional braid made of polyamide, which ensures protection against excessive wear and quiet operation. The braid is transparent in standard but it can also be ordered in black colour. There are two ways of installing the cable guides: to the facade or to the floor.
This system is recommended for projects where it is important to maintain a light form of building or it is difficult to use traditional aluminium guides.
The flat slats of this C80 variant make the bundle more compact when rolled in and take up much less space.
<

Technical specifications

Shape of slats
C
Maximum width
3.5 m
Maximum height
4.0 m
Electric drive
Yes
Manual drive
Yes
External use
Yes
Internal use
Yes
Group installation
Yes
Shape of slats
Maximum width of the side guides
Maximum width
Minimum height
Maximum height
Maximum projection
Beam height
Tilt angle
Electric drive
Manual drive
External use
Internal use
Cassette
Optional hood
Water drainage system
Cover
Fabric
Valance
Valance VOLANT
Changes angle of the blades
Group installation
Colour
Shape of slats
Maximum width of the side guides
Maximum width
Minimum height
Maximum height
Maximum projection
Beam height
Tilt angle
Electric drive
Manual drive
External use
Internal use
Cassette
Optional hood
Water drainage system
Cover
Fabric
Valance
Valance VOLANT
Changes angle of the blades
Group installation
Colour
Selt standard colors

Drive in
C80L Flat system

Manual
drive
Electric
drive
Manual
drive
The setting of Venetian blinds can be controlled by a crank mechanism with Cardan gear of 90° or 45°. In the case of outdoor systems with manual drive, it is necessary to remember about the necessity to lead the mechanism inside the room through the window frame or inside the wall which involves additional construction works.
Electric
drive
The electric motor is the most popular and convenient way to control Venetian blinds. Apart from the convenience of control, it allows you to connect the blind to the Smart Home system and to use additional accessories, such as a wind sensor or a sun sensor. The blind can be operated with a switch on the wall or remotely – by using a remote control.

Type
of slats

C-shaped slat
This type of slat with an arched C-shape is a proven solution for many types of internal and external blinds. The flat slats are made of 0.4 mm thick aluminium sheet.

Type
of cover panel

TYPE 1
For installation in window and door niche.
 - Available thickness of cover panel: 1,2 mm, 1,5 mm, 2 mm (thickness depends on color)
 - Cover panel in the front 
TYPE 2
For installation in window and door niche.
- Available thickness of cover panel: 1,2 mm, 1,5mm, 2 mm (thickness depends on colour)
- Cover panel in the front and back 
TYPE 3 / TYPE 3A
For installation on the facade.             
- Available thickness of cover panel: 1,2 mm, 1,5 mm, 2 mm (thickness depends on colour) 
-Cover panel in the front and at the top (roof)
- In type 3A the front cover and the top come in one piece
 -In type 3 the front cover and the top come in two parts
TYPE 4 / TYPE 4A
-Universal installation
-Available thickness of cover panel: 1,2 mm, 1,5 mm, 2 mm (thickness depends on colour)
 -Cover panel in the front, in the back and at the top (roof)
-In type 4A the front cover, the back and the top come in one piece (available only up to 20 cm high)
-In type 4 the front cover, the back and the top come in 3 parts

Features of
C80L Flat system

01 / 03
Compact size
when rolled up
The flat shape of slats means that this model takes up less space when the blind is rolled up.
<
>
02 / 03
Two ways of installation
Depending on the possibilities, the cable guide can be installed in two ways: facade or floor.
<
>
03 / 03
Cable
guides
Systems L are produced with steel cable guides. They introduce visual lightness and make it possible to be used where traditional aluminium guides cannot be installed.
<
>
0 CLASS OF WIND RESISTANCE
Construction resistant to wind <32 km/h
MODULAR SYSTEM
AUTOMATION
SMART HOME
QUIET SYSTEM OPERATION
EASY ASSEMBLY
PREMIUM QUALITY
PROTECTION AGAINST SUN
NATURAL AIR CONDITIONING
Find your
inspiration!

In the gallery you will find selected projects based on Selt systems, presenting their functions and variety of uses.

Get inspired and choose a solution tailored to the needs of your home or investment.
<
>

Frequently
asked questions

Can the blinds be cleaned with water?
It is recommended to clean small dirt on metal/aluminium surfaces with water and mild cleaning agents. It is unacceptable to use a pressure washer as well as strong cleaning agents and solvents, e.g. alcohol or gasoline. It is forbidden to use cleaning agents with the addition of chlorine, ammonia, kerosene, acetone and bleach to clean the system as well as to use such products in the vicinity of the system as this increases the risk of corrosion.
Does the color of the slats fade when exposed to sunlight?
Our blinds are made of the highest quality materials, using colour protection technologies. As a result, the colour of the blinds even when exposed to constant sunlight, does not lose its intensity.
How to measure the blinds installed in the niche yourself?
If the blind is mounted in a niche, the width should be measured in three places: at the top, in the middle and at the bottom. The smallest of these dimensions is given as the total dimension. In the case of system with cable guides it must be remembered that the width of the slats is always 2 cm smaller than the total width. As for the height, the total size of the niche should be given. Please note that depending on the height of the window frame, the system’s bundle may overlap the window light! The height of the blind’s bundle always depends on the total height of the system.
Selt@2022 All rights reserved
Zapisano